• Home
  • Product
    • Load Cells
    • Indicators
    • Vibrator Motors
  • About Us
  • Contact Us

Shear Beam Load Cell

Model 65023 n

Simplex Header

FEATURES

  • Rated capacities of 250 to 20,000 pounds, 125 to 10,000 kg
  • “Thruâ€? or “threadedâ€? load hole configurations
  • Low sensitivity to axial loads
  • Low profile (ultra low available in 1000 to 2500 pound ranges)
  • Sensorgageâ„¢ sealed to IP67 standards
  • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!).
  • Trade certified for NTEP Class III: 5000d, IIIL: 10000d and OIML R-60 3000d available

Optional

  • Stainless steel versions available
  • 65059 TWA companion weighing assemblies available

APPLICATIONS

  • Floor scales
  • Tank weighing
  • Bin and hopper weighing

DESCRIPTION

Model 65023 is a low profile shear beam load cell designed for high accuracy platform scales, pallet scales and process weighing applications.

It has high immunity to shock or side loading and is available in 2 or 3 mV/V sensitivity. Approved to OIML, NTEP standards. For hazardous environments this load cell is available with EEx ia IIC T6 level of European approval.

Nickel plating and full environmental sealing assures long-term reliability. A stainless steel option is available for the lb versions for use in harsh or corrosive environments.

The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension is achieved by feeding this voltage into the appropriate electronics.

Stainless Steel, Welded Seal Shear Beam Load Cell

Model 65083

Simplex Header

FEATURES

  • Rated capacities of 1000 to 20,000 pounds
  • Stainless steel, welded seal construction
  • Trade certified for NTEP Class IIIL 10000 and III 5000 divisions and OIML R-60 3000 divisions
  • Hostile or clean environment
  • Sensorgageâ„¢ sealed to IP67 standards
  • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!)

Optional

  • Integral conduit adaptor with teflon jacketed cable available

APPLICATIONS

  • Hostile environments: food and beverage processing, chemical and plastics processing, pharmaceutical and biomedical processing
  • Tank, bin and hopper weighing
  • Batching, blending and mixing systems

DESCRIPTION

Model 65083 provides the weighing industry with excellent protection necessary for today’s hostile environments in an economical low profile range suitable for platform scale manufacture.

Its low profile and all welded sealing combined with high accuracy makes this load cell ideally suited for low profile platforms, pallet truck weighers, tanks and silos. The guide slots incorporated into the upper and lower mounting faces enable manufacturers to easily position the load cell.

Hermetically sealed against moisture, the construction of the model 65083 in combination with a polyurethane dual shielded cable, enables continuous operation in harsh environments while maintaining a high operating specification.

The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.

Welded, Hermetically Sealed Load Cell

Model 355

Simplex Header

FEATURES

  • Capacities 5–500 kg
  • Stainless steel construction
  • OIML R60 and NTEP approved
  • IP68 protection

Optional

  • EEx ia IIC T6 hazardous area approval
  • FM approval available

APPLICATIONS

  • Low profile platforms
  • Loss-in-weight feeders
  • Marine and hybrid scales
  • Belt weighers
  • Food industry harsh environment

DESCRIPTION

Model 355 is a welded bending load cell manufactured in stainless steel. Hermetically sealed against moisture the Model 355 construction and polyurethane shielded cable enables the load cell to function in harsh environments while maintaining its operating specifications.

The low profile, high accuracy and sealing makes this load cell highly suitable for applications such as low profile platforms, weighing and packing machines, conversion of mechanical scales and variety of other applications where sealed cells are required. For hazardous environments this load cell is available with EEx ia IIC T6 level of approval as an option.

The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of change in the lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.

Double-Ended Shear Beam Load Cell

Model 65058

Simplex Header

FEATURES

  • Rated capacities of 10,000 to 100,000 pounds
  • Center-link loaded
  • Integral conduit adaptor
  • Trade certified for NTEP Class IIIL: 10000 divisions; Class III: 5000 divisions and OIML R60 3000 divisions in 20,000 to 100,000 pounds range
  • Sensorgageâ„¢ sealed to IP67 standards
  • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!).

Optional

  • 65058S stainless steel, welded seal version available
  • 65058-TSA companion assemblies for vehicle scales
  • 65069-TWA companion assemblies for vessel weighing
  • Capacities up to 500,000 consult factory

APPLICATIONS

  • Truck scales
  • Railroad track scales
  • Precision tank, bin and silo weighing
  • Level and inventory monitoring

DESCRIPTION

The 65058 is a mid to high capacity, nickel-plated alloy steel, double ended Shear beam load cell

This product is designed for use in certified truck and rail scales and is available in capacities ranging from 10k to 100k lbs.

This load cell is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environment. This load cell is certified for legal for trade applications by both American NTEP and International OIML standards.

Miniature Double-Ended Beam

Model MDB

Simplex Header

FEATURES

  • Capacities: 10–50T
  • High side load tolerance
  • Electroless nickel-plated alloy tool steel
  • Surge protection optional for 10T to 50T

Optional

  • Heretically sealed available
  • FM approval available

APPLICATIONS

  • Truck/rail scales
  • Silo/hopper/tank weighing

DESCRIPTION

MDB is designed for truck and rail scales in high capacities with low profile.

The design of loading through a ball is insensitive to side load.

MDB is constructed of alloy steel and is fully potted and sealed with special chemical compounds to IP67 providing excellent protection against water and moisture attack. MDB Hermetically-Sealed is constructed to IP68 providing excellent protection against corrosive and wash-down environments.

S-Beam Load Cell

Model 60001

Simplex Header

FEATURES

  • Rated capacities of 25 to 20,000 pounds 50 kilograms to 10 metric tons
  • Designed for single or multiple load cell applications
  • Constructed of high quality alloy tool steel
  • Nickel plated for outstanding corrosion resistance
  • Sensorgageâ„¢ sealed to IP67 standards
  • Trade certified for NTEP Class III: 5000d, IIIL: 10000d and OIML R-60 3000d available
  • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2;Groups A through G. Also, non-incendive ratings (No barriers!).

Optional

  • Stainless steel version is Model 60050

APPLICATIONS

  • Tank, bin and hopper weighing
  • Level and inventory monitoring
  • Truck scale conversions
  • Tension and compression measurements

DESCRIPTION

Model 60001 is a tension-compression load cell with a humidity-resistant coating and shielded cables, which enable use in harsh environments while maintaining operating specifications. Additional sense wires compensate for changes in lead resistance due to temperature change and/or cable extension.

Ideally suited for lever conversions, hanging scales, force measurement and a wide range of other industrial applications. Nickel-plated for outstanding corrosion resistance.

Low Capacity Single-Point Aluminum Load Cells

Model 1040/1041

Simplex Header

FEATURES

  • Capacities 5–100 kg
  • Aluminum construction
  • Single-point 400 x 400 mm platform
  • OIML R60 and NTEP approved
  • IP65 protection
  • Available with metric and UNC threads

Optional

  • EEx ia IIC T4 - hazardous area approval
  • FM approval available
  • IP67 available

APPLICATIONS

  • Bench scales
  • Counting scales
  • Grocery scales

DESCRIPTION

Models 1040 and 1041 are low profile single-point load cells designed for direct mounting of low cost weighing platforms.

Their small physical size, combined with high accuracy and low cost, makes these load cells ideally suited for retail, bench and counting scales.

Available in anodized aluminum these high accuracy load cells are approved to NTEP and other stringent approval standards, including OIML R60. For hazardous environments this load cell has EEx ia IIC T4 level of approved option. An optional special humidity resistant protective coating assures long-term stability over the entire compensated temperature range.

The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.

Low Profile Platform Load Cell

Model 60060

Simplex Header

FEATURES

  • Rated capacities of 100 to 2000 pounds
  • Unique shear beam design—aluminum construction
  • Moment-compensated design for minimal sensitivity to moments induced by off-center loading
  • Ideal for situations exceeding the capabilities of similar “brickâ€? design load cells
  • Trade certified for NTEP Class III:5000 divisions; Class IIIL:10000 divisions and OIML R60 3000 divisions
  • Sensorgageâ„¢ sealed to IP67 standards
  • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2;
  • Groups A through G. Also, non-incendive ratings (No barriers!)
  • Also available in stainless steel

APPLICATIONS

  • • Single-point platform scales • Belt conveyor scales
  • • Bench and counting scales • Checkweighing scales
  • Hopper scales and netweighing

DESCRIPTION

Model 60060 is a single point load cell designed for direct mounting of large platforms.

The product is a cost-effective load cell for use on counting, weighing, bench or floor scale products.

This high accuracy load cell is approved to OIML R60, NTEP and other stringent approval standards. Suitable for use in hazardous environments, these load cells can be provided with European approval to EEx ia IIC T4 and are FM approved to Class I, II, III, Division I.

A special humidity-resistant protective coating assures long term stability over the entire compensated temperature range.

The two additional sense wires, sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wires resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.

Single-Point Alloy Steel Load Cell

Model 92006

Simplex Header

Document No.: 11655 Revision: 11-Jun-2012 Technical contact in Americas: lc.usa@vishaypg.com; Europe: lc.eur@vishaypg.com; Asia: lc.asia@vishaypg.com www.vpgtransducers.com 174

FEATURES

  • Capacity: 100 to 1500 kg
  • Alloy steel construction
  • Single-point 900 × 900mm platform
  • IP66 protection

Optional

  • Stainless steel construction

APPLICATIONS

  • Large platform scales
  • Bench scales
  • Counting scales
  • Check weighing scales

DESCRIPTION

Model 92001 is an alloy steel single-point load cell designed for direct mounting in large platform scale applications. The cost effective load cell is ideal for use in counting, bench and floor scales.

This model provides scale manufacturers with a high-accuracy low-cost sensor for their most demanding technical requirements.

Low Profile Platform Cell

Model 60048

Simplex Header

FEATURES

  • Rated capacities of 25 to 1000 pounds
  • Constructed of stainless steel
  • Moment-compensated design for minimal sensitivity to moments induced by off-center loading
  • Exceeds NIST H-44 requirements
  • Provides optimum protection under adverse loading conditions
  • Sensorgageâ„¢ sealed to IP67 standards
  • Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G. Also, non-incendive ratings (No barriers!)

APPLICATIONS

  • Single-point platform scales
  • Belt conveyor scales
  • Bench and counting scales
  • Checkweighing scales
  • Hopper scales and netweighing

DESCRIPTION

The 60048 is a high precision, stainless steel, single point platform load cell.

This product’s availability in capacities ranging from 25 to 1000 lbs. makes it ideal for many low to mid range capacity weighing applications. This load cell is most commonly used in platform scales, but can be adapted for use in many process weighing applications.

The stainless steel construction and IP67 sealing make this load cell ideal for harsh environment applications.

This product is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments.

Ring Torsion Load Cell

Model RLC

Simplex Header

FEATURES

  • Capacity range: 250 kg to 60 ton
  • Low profile, stainless steel construction
  • Hermetically sealed, IP66 and IP68
  • Meets OIML R-60 and NTEP 6000d
  • Outputs are matched to ensure easy and accurate parallel connection of multiple load cells

Optional

  • ATEX certified versions are available for use in potentially explosive atmospheres
  • Multi-interval and multiple-range versions are available

APPLICATIONS

  • Platform scales
  • Belt scales
  • Silo hopper weighing

DESCRIPTION

The RLC is a low profile, high performance stainless steel ring torsion type load cell.

The fully welded constuction and glass-to-metal cable-entry ensure that this product can be used successfully in harsh environments found in the food, chemical and allied process industries.

This product is suitable for small and medium platform scales, hoppers and process weighing.

This product meets the stringent Weights and Measures requirements throughout Europe and USA.

Low Profile Universal Load Cell

Model 98001

Simplex Header

Document No.: 11657 Revision: 14-Jun-2012 Technical contact in Americas: lc.usa@vishaypg.com; Europe: lc.eur@vishaypg.com; Asia: lc.asia@vishaypg.com

FEATURES

    <
  • Capacity: 0.5–100T
  • Alloy steel construction
  • Universal load cell
  • Integrated overload protection (in compression)
  • Tension and compression loading

Optional

  • Model 98005 without base mounting plate (for compression applications only)
  • Metric and imperial threads

APPLICATIONS

  • Universal testing machines

DESCRIPTION

machine applications employing both tension and compression loading. This shear beam design load cell provides excellent immunity to impact and side forces. This load cell includes integrated overload protection for compression loading applications.

Compression Load Cell

Model ASC

Simplex Header

FEATURES

  • Capacities: 30, 40, 50, and 60T
  • Self-aligning, stainless steel single column
  • Hermetically sealed, IP66 and IP68
  • Certified to OIML R60, 6000d and NTEP class IIIL, 10000 divisions
  • Built-in surge protection tubes (GDTs)
  • Current calibration output (SC) ensures easy and accurate parallel connection of multiple load cells

Optional

  • Digital version available (model DSC)

APPLICATIONS

  • Weighbridges
  • Silo hopper weighing

DESCRIPTION

The ASC is a single column, stainless steel compression load cell.

This product is suitable for use in road and rail weigh bridges and process weighing applications.

The welded construction and built-in surge protection ensure that this product can be used successfully in harsh environments.

This load cell meets the stringent Weights and Measures requirements throughout Europe and the USA.

Co-Planar Beam Load Cell

Model 380

Simplex Header

FEATURES

  • Capacity range: 7.5–250 kg
  • Only 2.5–8 mm high
  • Very low profile
  • Aluminum construction
  • IP65 protection
  • 1000Ω input impedance
  • Provides freedom in rectangular scale size design
  • Matched output and current calibration circuitry
  • Eliminates need for spyder in typical bench top scales

APPLICATIONS

  • Personal scales
  • Commonly used in low profile infant and adult medical scales
  • Large and medium low profile platform scales
  • Airport baggage scales
  • Postal scales

DESCRIPTION

Model 380 is a very low profile planar beam design, allowing direct mounting in low profile platform scales. The range of capacities and low profile make Model 380 most suitable for use in a wide range of applications.

Digital Compression Load Cell

Model SCC

Simplex Header

FEATURES

  • Capacities: 10–100 ton
  • Digital output via RS-485 or RS-422 interface
  • Low profile, multi-column, stainless steel construction
  • Hermetically sealed, IP66 and IP68
  • • Certified to OIML R-60, 4000d • 240,000 counts resolution
  • Multiple-range versions available
  • Internal diagnostics and lightning protection
  • Maximum transmission distance 1200m

APPLICATIONS

  • • Weighbridges • Silo hopper weighing

DESCRIPTION

The SCC is a multi-column, low profile, stainless steel, compression load cell with a digital output signal.

This digital output enables the user to communicate with each SCC independently of the others in the system, thus offering advantages in system setup, system control, corner correction, fault finding and load cell replacement.

Suitable applications for this product include various types of road and rail weighbridges, and process weighing.

This product meets the stringent Weights and Measures requirements throughout Europe.

Digital Miniature Double-Ended Beam

Model MDBD

Simplex Header

FEATURES

  • Easy corner compensation of the weighbridge
  • Capacities: 10–30T
  • Digital output via RS485 or RS422 interface
  • High side load tolerance
  • Electroless nickel-plated alloy tool steel
  • Surge protection optional
  • Extensive internal diagnostics
  • External resolution 240,000 counts
  • Internal resolution 1,000,000 counts
  • Maximum transmission distance 1200m

APPLICATIONS

  • Truck/rail scales
  • Silo/hopper/tank weighing

DESCRIPTION

The MDBD is designed for truck and rail scales in high capacities with low profile. The design of loading through a ball is insensitive to side load.

The MDBD is constructed of alloy steel and is fully potted and sealed with special chemical compounds to IP67 providing excellent protection against water and moisture attack. .

The digital output enables the user to communicate with each MDBD independently of the others in the system, thus offering advantages in system setup, system control, corner correction, fault finding and load cell replacement. .

Fluid-Damped Single-Point Load Cell

Model 240

Simplex Header

FEATURES

  • Capacities 2–50 kg
  • Painted steel construction
  • OIML R60 and NTEP approved
  • IP66 protection
  • Available with metric and UNC threads

Optional

  • Stainless steel construction

APPLICATIONS

  • Multi-head filling machines
  • Check weighing
  • Grading machines
  • Liquid filling
  • Dynamic weighing

DESCRIPTION

Model 240 is specifically designed to be used where fast acquisition of a stable load signal is paramount. The Model 240’s unique fluid damping system allows the load cell to be used in applications that previously required the use of LVDT’s or similar types of measuring devices.

The Model 240 brings load cell adaptability into check weighing and grading applications.

Approved to OIML R60 and NTEP standards, sealed to IP66 level and available in coated steel or stainless steel, the Model 240 is suitable for most wash-down applications.

The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.

Copyright © 2014 Techno Products | All Rights Reserved